Small rooms can easily accommodate bunk bed so that two or more people can sleep in one room. Also, bunk beds cost you less than buying two single beds. However, these beds have negative facet too. According to the reports, every year around 400 kids getting injured due to the l shaped bunk bed. Most of these accidents are happening due to poor designs of the bunk bed or wrong models or structure. That is why it is important to follow safety tips to avoid such injuries. Here you can find some tips that can help you purchase the right bed for the safety of your children.
L-shaped bunk beds safety tips:
The significance of mandatory standards: The most crucial safety advice is that always buy a l shaped bunk bed that it meets the standards of the industry. The standard must cover all facets, including design and construction, particularly they should concentrate on the spaces and sizes of gaps, as the little kids put their heads, legs, and arms in the gaps, which can cause injuries. In case, the gap is too small then there are more chances of little children’s body parts can get caught and cause injury. Make sure to purchase the bed that has the label showing that it meets the mandatory standards.
Also, when you are assembling the bed, make sure to read all the instructions provided in the manual before you assemble the parts. If you have done a poor job, then it can cost you more, the chances of your kid getting injuries are more if you haven’t’ done the job properly. Follow each instruction and make sure that all parts are fixed and glued or nailed properly.
The importance of ladder and guardrails: Most parents take it light to put guardrails or ladder on the bed. But, the guardrails should be fixed all sides of the upper bunk, which protects the child from falling off the bed when he/she roll over on the bed while sleeping. Don’t use the wall as a guard as it can cause more injuries to the child if they get trapped between the bed and the wall.
Also, you should get kid-friendly ladders for the l shaped bunk bed so that the kids can climb up and down without any assistance. The ladder is crucial for the l shaped bunk bed, especially at night time when your child needs to use the bathroom. Also, make sure that the ladder can be foldable, or you can easily remove it if it is not needed, especially when you have a little kid around. The ladder is not suggestible if you have toddlers at home as it can cause more danger if they try to climb the bed when you are not around.
Read more at:http://bedframesjudge.com
]]>
1. Single needle machine
Single needle machines look almost traditional. They have a flatbed and come with removable embroidery units, making them applicable for normal utility sewing as well as computerized embroidery. Many of these machines are designed to be smart and user-friendly so that they can be easily alternated for decorative and normal sewing.
Single needle machines usually have the needle, bobbin, and thread all in one head. These are kept stationary while the fabric is moved under it. The machine can either be run manually or set with predetermined orders depending on the length of the fabric and the style of embroidery.
Pros
The single needle machines are very affordable, readily available and give a great finishing.
Since they are controlled by a computerized program, they run very precisely, giving just the desired result.
You will also get to choose from a wide range of design options.
Cons
This type of machine may be impractical if you are deciding to undertake sewing for commercial purposes.
It would be very hectic and time-consuming to frequently change the differently colored threads.
It is also not sensible to devote such a long time to one single garment.
2. Multiple needle threads
Home embroidery machines with multiple needles make sewing more fun and allow you to experiment with more complex and challenging designs. The number of needles may vary from four to ten. You can use the needles for threads of different colors and textures. As you continue your embroidery, you will not be frequently required to pause and change threads. This will make the entire process smoother and faster.
Pros
Very convenient for multi-color designs.
They are also practical for commercial use.
Cons
The only disadvantage is that these machines are comparatively more expensive than the single needle machines. However, they are worth the investment.
Comparison
The multiple threaded home embroidery machines are best suited for people who take sewing more seriously. It is also ideal if you are looking for channels to commercialize your skills. Since the multiple threaded machines are more of an investment, you should definitely consider your dedication to the trade before you buy it.
Single threaded machines are very practical. They can be used for embroidery as well as normal utility sewing. These machines are best suited for people who only resort to sewing when the situation demands. These are also more appropriate for beginners making a venture into sewing.
Read more about many different types of monogram home embroidery machines.
]]>Beekeeping is a hot topic these days. Some people are adopting beekeeping for business while others are adopting it as a hobby. Beekeeping has enormous following and is adopted on national and international levels. Even there are some companies exporting natural honey to various countries. This a very good sign for the beekeepers as the honey is being exported as well. Young entrepreneur can start their own business of beekeeping and start exporting it as well.
One major challenge for beekeeping that is being faced since last decade is alarming increase in the occurrence of colony collapse disorder. One of the other challenges is not having the up to dated beekeeping equipment. During the winter season it is really difficult to keep bees safeguarded from different diseases and keeping them safe is also a challenge. Therefore, some experience is needed before you opt the hobby of beekeeping right away.
The best way to start beekeeping is taking classes in some local institute. Either you can contact the beekeeping experts and ask them the information of beekeeping. Don’t forget to ask the experts about the equipment required for safety and for acquiring honey like manual or electric honey extractor. Also books on the beekeeping are helpful and must read. There are hundreds of books available on beekeeping that you can study and get knowledge. You have to know the crucks of the beekeeping before you start it as a profession or hobby.
The answer to the question whether beekeeping be right for you or not is very simple. First of all you have to have knowledge of the bee keeping. When you have sufficient knowledge then take your time and decide whether you should go for it or not. Now there are some rules and regulations applied to the beekeeping. For example, you cannot do beekeeping in public place, you have to sit in a remote place where there is not population. This is because the honey bees might be dangerous for the general public sometimes. Especially by the time you get honey from the hives. The second rule is that you must have adequate knowledge of beekeeping. You cannot start away on your own. You have to seek permissions from the higher authorities. Once you get answer to the questions in positive aspect, you should opt for beekeeping instantly.
]]>
Check out the first part of the video series DIY Arduino CNC Router Cutter Welder
CNC wood carving machines can even be made at home using tools such as aluminum U channels, threaded rods, long nuts, bearings, acrylic boards and a controlling unit. Although a diy cnc machine can be used for a number of purposes, it is mostly used for fabricating raw materials by selective removal of different components. The versatility offered by these machines has also led to it being called as a soft-wired numeric control machine.
1. These machines can be used for 24 hours a day. They are very low maintenance as well as cost effective. You can only switch them off for a few hours so as to decelerate wearing off.
2. Cnc machine can be programmed so as to give exactly the required output. This allows for increased accuracy and positional precision while the work is being done. You can also have them repeat the same task over and over again by forming loops.
3. Even a homemade cnc router can offer a high degree of quality and reusability when it comes to the different functions that it can be programmed for.
4. It will act as the perfect trial for an awaited design. If the machine starts performing as expected, you can then have other copies made in the same fashion. So basically, it is a cost-effective and risk-free way of trying out receptivity of different orders given to the machine.
5. If you are running any kind of small scale carpentry industries, then these machines can be a great help. They can take care of the given job with high accuracy and also do not need training time. You will be able to increase the speed of manufacturing and also save time as well as money. However, the greatest advantage is that you do not have to deal with the mistakes that come with less skilled labors.
6. Once the machines are programmed, they can be left to themselves. Hardly any assistance is needed except to change the programs/settings and switching the power on and off.
7. There are no computational errors associated with home-made CNC wood routers. Once you learn the basics, these are very easy to operate. You will also not be required to frequently inspect the parts.
8. You can have it programmed for different settings. Once they are put to work, they give maximum output with zero time delay and operator fatigue. You can also freely interrupt to check while the machine is the middle of some activity.
Kuyasa is South Africa’s first internationally registered Clean Development Mechanism (CDM) project under the Kyoto Protocol on climate change and was the first Gold Standard Project to be registered in the world. The project has generated substantial interest locally and internationally as a pilot for the energy-efficient adaptation of South African low-cost housing..
The Kuyasa project was developed by the nongovernmental organisation (NGO) SouthSouthNorth (SSN) for the City of Cape Town’s Environmental Resource Management Department and Urban Renewal Programme. Ten pilot houses were adapted in 2005, providing the practical data for an efficiency measuring system.
With funding from the Department of Environment and Tourism’s (DEAT’s), Social Responsibility Programme and Provincial Government’s Department of Housing, the retrofitting of 2,300 houses in Kuyasa, Khayelitsha started in August 2008 and was completed in October 2010.
]]>